Enamel Biogas Storage Tank With Double Membrane Roof For Anaerobic
What are Biogas and Biogas Storage Tank?
Biogas is made from landfill and organic waste, by the breakdown of
Bio-waste inside a landfill due to chemical reactions and microbes, or as
digested gas, produced inside an anaerobic digester. Biogas tank is designed as an anaerobic digester that treats farm wastes or energy crops. The biogas can be
produced using anaerobic digesters (air-tight tanks with different
configurations). These plants can be fed with energy crops such as
maize silage or biodegradable wastes including sewage sludge and food waste. During the process, the
micro-organisms transform biomass waste into biogas and digestate. The biogas is a renewable energy that can be used for heating,
electricity, and many other operations that use a reciprocating
internal combustion engine. Other internal combustion engines such
as gas turbines are suitable for the conversion of biogas into both
electricity and heat. The digestate is the remaining inorganic
matter that was not transformed into biogas. It can be used as an
Biogas tank is critical for the production and storage of biogas.
So a tank with good quality and long service life is very
important. There are various types of anaerobic digestion tank.
Normally the enamel biogas storage tank is more preferred.
The advantages of supplying GFS/Enamel tanks by Center Enamel
- Short construction period and convenient installation: The tank is
bolted type. All the enamel panels are connected by self-locking
bolts. It is unnecessary to conduct the assembly by welding. The
assembly and erection period can be shortened greatly. Besides, the
bolted tank is also convenient to install. Few tools and materials
need to be prepared.
- Low cost for the project: As the tank is erected conveniently and
in short period, it can save much more cost for the project than
other installation methods. Bolted enamel tank can make lower labor
cost, lower material cost and lower tool usage cost.
- Superior corrosion resistance and long service life: Double-coated
enamel panel has strong corrosion resistance against acid, alkali,
and other corrodible substance. Due to the excellent corrosion
resistance, our enamel tank has a very long service life more than
- Strong enough to prevent crack and impact: GFS/enamel tank by
Center Enamel is of strong pressure standing ability.
- Attractive appearance and Customized color provided: Various colors
are available to be applied on the tank. So client can choose a
customized color to make the tank appearance more attractive.
- Low maintenance costs: enamel tank has many great performances such
as superior corrosion resistance and good abrasion resistance. So
it is unnecessary to process anti-corrosive treatment every
- Flexibility to re-model, extend, dismantle and relocate: Because
the tank consists of bolts & enamel panels and it is very light
and flexible, it is very easy to be dismantled and rebuild anywhere
else. What’s more, by adding more panels, the tank can be extended
to larger size.
Therefore, excellent performance with good corrosion resistance and
long-service life make enamel tank the best choice for client to
use in biogas production.
For further reference, the following Basic Parameter Table is
|Coating Color||Dark Green; other colors can be customized|
|Coating Thickness||0.25 ~ 0.40 mm, double coatings on both sides of panel|
|Acid / Alkali Proof||Standard PH: 3 ~ 11, Special PH: 1 ~ 14|
|Elasticity||Same as steel sheet, around 500 KN/mm|
|Service Lift||More than 3 years|
|Holiday Test||>1500 v|
|Permeability||Gas / Liquid impermeable|
|Easy to clean||Smooth, glossy, insert, anti-adhesion|
|Corrosion resistance||Excellent, suitable for wastewater, salt water, sea water, high
suifur crude oil, sale fox, organic and inorganic compounds|
Here are some projects of Biogas production: